STUDY OF AN EFFECTIVE NON-TRACKING CONCENTRATED SOLAR POWER SYSTEM AS A VIABLE SOLAR THERMAL BIOMASS CONVERSION PROCESS

Authors

  • M. SHAHRIR M. ZAHARI Faculty of Technology, Ocean Engineering and Informatic, Universiti Malaysia Terengganu
  • SHAHRUL ISMAIL Faculty of Technology, Ocean Engineering and Informatic, Universiti Malaysia Terengganu
  • THIRU MANGAI SRINIVASAN Faculty of Technology, Ocean Engineering and Informatic, Universiti Malaysia Terengganu

DOI:

https://doi.org/10.46754/umtjur.v3i3.226

Keywords:

Biomass, fresnel lens, solar concentrator, pyrolysis, thermal process

Abstract

Sunlight is a natural energy source and abundantly available but restricted to certain timeframe and angles depending on the Earth surface where it could be effectively harvest for energy source. Therefore, the purpose of the study is to evaluate the performance of fixed setting systems in comparison to a custom made non-tracking solar concentrator especially in their potential to reach suitable internal temperature ranges required for pyrolysis purpose within a sealed quartz glass reactor as the heat receiver. For the solar collector, six segmented mirrors were placed at varied angles to enable continuous sun ray directed toward one focal spot, at any time of the day without the need for electrical tracking or manually adjusting it based on the sun angle. The parameters in designing the system setup include: Focal Length, Tilt Angle of lens and Azimuth Angles. It is observed that by fixing the focal length to 35 cm and adjusting the tilt angle of the lens to be fixed at 30°, the reactor was able to achieve the desired temperature range of between 700 to 730. It can be concluded that the combination of Fresnel lens and simple mirror system were capable of concentrating sunlight into a specific area to reach the desired heating range without the need for complicated, costly equipments.

References

Abdullah, W. S. W., Osman, M., Kadir, M. Z. A. A., & Verayiah, R. (2019). The potential and status of renewable energy development in Malaysia. Energies, 12(12). DOI: https://doi.org/10.3390/en12122437

Alamoudi, A., Saaduddin, S. M., Munir, A. B., Muhammad-Sukki, F., Abu-Bakar, S. H., Yasin, S. H. M., Sellami, N. (2019). Using static concentrator technology to achieve global energy goals. Sustainability (Switzerland), 11(11), 1–22. DOI: https://doi.org/10.3390/su11113056

Barbosa1, J. L. (2016). Development of a solar concentrator with tracking system. Copernicus Publications. DOI: https://doi.org/10.5194/ms-7-233-2016

Cheng. C. K. (2016). Biaxial-Type Concentrated Solar Tracking System with a Fresnel Lens for Solar-Thermal Applications. DOI: https://doi.org/10.3390/app6040115

Gupta, M., Dubey, A. K., Kumar, V., & Mehta, D. S. (2019). Solar concentrator based multipurpose sunlight harvesting system without tracking. OSA Continuum, 2(3), 667. DOI: https://doi.org/10.1364/OSAC.2.000667

Kannan, N., & Vakeesan, D. (2016). Solar energy for future world: - A review. Renewable and Sustainable Energy Reviews, 62, 1092–110 DOI: https://doi.org/10.1016/j.rser.2016.05.022

Leutz, R., Suzuki, A., Akisawa, A., Kashiwagi, T., & Toksoy, J. (2000). Developments and designs of solar engineering Fresnel lenses. Proceedings Symposium on Energy Engineering, 2, 759–765.

Madhugiri, G. A., & Karale, S. R. (2012). High solar energy concentration with a Fresnel lens: A Review. International Journal of Modern Engineering Research (IJMER)

Mansour, A. F. (2005). Optical Properties of Fullerene/PMMA. International Journal of Polymeric Materials, pp. 227–235. DOI: https://doi.org/10.1080/0091430390246784

Mekhilef, S., Safari, A., Mustafa, W.E.S., Saidur, R.., Omar, R.., Younis, M. A. A. (2012) Solar energy in Malaysia: Current state and prospects. Renewable and Sustainable Energy Review, 16, 386–396. DOI: https://doi.org/10.1016/j.rser.2011.08.003

Peinado Gonzalo, A., Pliego Marugán, A., & García Márquez, F. P. (2019). A review of the application performances of concentrated solar power systems. Applied Energy, 255, (March), 113893. DOI: https://doi.org/10.1016/j.apenergy.2019.113893

Ullah, I., & Shin, S., (2014). Highly concentrated optical fiber-based daylighting systems for multi-floor office buildings. 72, 246-261. DOI: https://doi.org/10.1016/j.enbuild.2013.12.031

Vu, N. H., & Shin,. S. (2016). Optical fiber daylighting system combined with LED lighting and CPV based on stepped thickness waveguide for indoor lighting. Journal of the Optical Society of Korea, 20(4), 488–499. DOI: https://doi.org/10.3807/JOSK.2016.20.4.488

Xie, W. T., Dai, Y. J., Wang, R. Z., & Sumathy, K. (2011). Concentrated solar energy applications using Fresnel lenses: A review. Renewable and Sustainable Energy Reviews, 15(6), 2588–2606. DOI: https://doi.org/10.1016/j.rser.2011.03.031

Zeaiter, J., Ahmad, M. N., Rooney, D., Samneh, B., & Shammas, E. (2015). Design of an automated solar concentrator for the pyrolysis of scrap rubber. Energy Conversion and Management, 101, 118– 125. DOI: https://doi.org/10.1016/j.enconman.2015.05.019

Zheng, H. (2017). Solar Energy Desalination Technology. Amsterdam: John Feder.

Additional Files

Published

2021-07-31

How to Cite

M. ZAHARI, M. S., ISMAIL, S., & SRINIVASAN, T. M. . (2021). STUDY OF AN EFFECTIVE NON-TRACKING CONCENTRATED SOLAR POWER SYSTEM AS A VIABLE SOLAR THERMAL BIOMASS CONVERSION PROCESS. Universiti Malaysia Terengganu Journal of Undergraduate Research, 3(3), 143–154. https://doi.org/10.46754/umtjur.v3i3.226